CHAPTER 3 MECHANICAL SYSTEMS
2.1.2-2 Mounting the Folding Roller
1) Mount the gears [2] so that the openings
[1] in the folding roller face each other,
matching the phase.
2.1.3 Adjusting the Position of the
stitcher
Poor adjustment can lead to
stitching faults.
1) Remove the saddle unit inside cover.
2) Disconnect the connector [1] of the
saddle jam LED PCB, and free the har-
ness [2] from the tie-wrap [3].
3) Remove the three screws [4], and detach
the stitcher base unit fixing plate (front,
[5]).
3-54
COPYRIGHT© 2001 CANON INC.
[2]
[1]
[4]
2000 2000 2000 2000
CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
F03-201-23
[3]
[2]
F03-201-24
[5]
F03-201-25
[1]