Knurled Belt; Remove The Knurled Belt - Canon SADDLE FINISHER K3 Service Manual

1.5 Knurled Belt

1.5.1 Remove the Knurled Belt

1) Remove the handling tray unit. (1.2.1)
2) Disconnect the finisher from the copier.
(1.1.3)
3) Remove the rear over.
4) Disconnect the connector [1], and free
the harness [3] from the cord clamp [2].
5) Remove the three screws [4], and detach
the sort delivery guide [5].
6) Remove the two E-rings [6] on both
sides of the sort delivery roller and the
bearing [7] from the front.
7) Detach the knurled belt [8] from the
sort delivery roller shaft.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[4]
[5]
F03-105-01
[6] [7]
F03-105-02
[2] [1]
[3] [4]
[8] [6]
[9]
[7]
3-27