Tray A Unit/Tray B Unit; Moving Down The Tray A/B Unit - Canon SADDLE FINISHER K3 Service Manual

1.3 Tray A Unit/Tray B Unit

1.3.1 Moving Down the Tray A/B
Unit
1) While holding the tray frame [1] from
below, insert a screwdriver into the long
hole [2] in the rear of the body.
2) While freeing the ratchet with a screw-
driver or the like, move down the tray
A/B unit.
The tray A/B may be detached
to free the ratchet [3].
Memo
If the power is turned on while
the latchet is not engaged, the
locks of the tray lock sensor
will not change, causing 'E540/
E542'.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
CHAPTER 3 MECHANICAL SYSTEMS
[1]
F03-103-01
[3]
F03-103-02
[2]
3-19