Removing This Machine; Removing This Machine From The Host Machine - Canon Inner Finisher-J1 Service Manual

Removing this Machine

Removing this Machine from
the Host Machine
■ Removing this Machine from the
Host Machine. (In the case of Inner
Finisher only)
1. Open the Front Cover [1] and Front Upper Cover [2].
2. Remove the Left Upper Cover [1].
• 1 Screw [2]
1x
[1]
3. Remove the Left Cover [1].
• 3 Screws [2]
3x
[2]
[2]
[2]
[1]
4. Remove the Fixed Plate [1].
• 1 Coin Screw [2]
[1]
5. Remove the Connector Cover [1].
• 1 Screw [2]
6. Pull out the Finisher Cable Harness [2] from the the
hole [1] of the Inner Cover.
• 2 Connectors [3]
43
4. Disassembly/Assembly
[1]
1x
[2]
1x
[1]
[2]