Other Parts; Removing The Return Belt Unit - Canon Inner Finisher-L1 Service Manual

Other Parts

Removing the Return Belt Unit

■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Front Cover
Cover Unit" on page 76
3. Remove the Rear Cover."Removing the Rear Cover"
on page 76
4. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 80
5. Remove the Stapler Unit."Removing the Stapler
Unit" on page 85
■ Procedure
1. Remove the Upper Stay [1].
• 2 Screws [2]
2x
Unit."Removing the Front
Unit."Removing the
[2]
[1]
4. Parts Replacement and Cleaning
2. Remove the Center Return Belt Guide [1].
• 2 Bosses [2]
[2]
3. Rotate the machine as shown below.
93
[1]
[2]