Delta Laminator
1.5 SAFETY NOTICES – ADJUSTABLE GUIDE PLATES ADJUSTMENT
The guide plates form paper in front of the laminating roller. The position of the plates has to be
adjusted according to the different paper weight.
!
WARNING
Obey the following precautions. Failure to do so can result in severe personal injury or damage the
machine.
•
The position of the plates can be adjusted with the adjustment screw while the machine is in
operation.
•
The adjustment can be done only by an operator trained by GBC Service.
•
The operator should wear tight fitting clothes to prevent possible trapping with the gate or feeder
rollers. Always use only one hand for the adjustment.
•
The adjustment must be done while the laminating roller cover is closed even if the machine is
not in operation.
Adjusting
screw
© 2004 General Binding Corporation
Cover of laminating roll
Operator Manual
13