Operator Manual
1.3 SAFETY NOTICES – FEEDER HEAD HANDLING
The feeder head picks up a sheet of paper and loads it into the feeder rollers. It is necessary to change
the position of the feeder head if the sheet size is changed.
CAUTION
!
Obey the following precautions. Failure to do so could result in minor personal injury or damage the
machine.
•
Do not hold on to the feeder head while the machine is in operation. The moving energy of the
suction cups can injure the hands.
•
Do not adjust the feeder head if the machine is in operation. The moving energy of the suction
cups can injure your hands. The control buttons are the only exception.
•
Do not handle the feeder head if the machine is not at rest. The control buttons are the only
exception.
•
To move the feeder head, loosen the clamp on the guide bar using the manual lever. Work
carefully. A fast movement could result in hitting the drive cover.
10
Delta Laminator
Manual lever
Hold it here if
you need to
move the head.
© 2004 General Binding Corporation