Safety Notices - In-Feed Wheels And Gate Adjustment - GBC DELTA Operator's Manual

Operator Manual
1.4 SAFETY NOTICES – IN-FEED WHEELS AND GATE ADJUSTMENT
!
CAUTION
•
Do not handle the units in any way if the machine is in operation.
•
The weights can be put in and taken out only if the machine is at rest.
(You can get trapped with the feed roller while handling the in-feed wheels.)
•
Always handle the rollers with the laminating roller Plexiglas cover down.
•
While the machine is in operation, do not touch the in-feed mechanism.
•
When the machine is turned off with the main switch, the accelerating wheels snap up 5/32 in.
(4 mm). Turn off the machine with the main switch if the in-feed wheels are to be adjusted. You
must be very cautious if the machine cannot be adjusted with the main switch turned off.
12
Delta Laminator
Weight
© 2004 General Binding Corporation