Operator Manual
Important
•
The machine can be operated only by an operator who has been trained appropriately by a
GBC service technician.
•
The operator should use the primary and secondary stations to operate the machine. See the
illustration in Section 1.1.1.
•
The machine cannot be used for any work other than laminating paper.
•
The type of film and paper must comply with the conditions given in Chapter 3, Technical
Specifications.
•
The machine has the necessary controllers for providing the laminating function. The controllers
cannot be adjusted or modified otherwise than provided by the manufacturer.
•
The machine must be placed on a solid and even surface. The operator's workstation must be
at the same level as the machine.
Note
•
Lighting should be adequate for the safe operation of the machine.
1.1.1 OPERATOR'S PRIMARY AND SECONDARY STATIONS
Operator's secondary
station
8
Operator's primary
station
Delta Laminator
Operator's secondary
station
© 2004 General Binding Corporation