Side Guides - GBC DELTA Operator's Manual

Delta Laminator
Operator Manual
7.3

SIDE GUIDES

The side guides center the paper stack (c). They are symmetrically adjusted to the machine center.
There has to be slight clearance between the side guide strips and paper stack so that the strips will
not damage the paper and will not cause improper sheet feeding. The side guides are controlled by the
handle on the operator's side (d). The arrow (e) represents the turning direction if the side guides
position needs to be changed. If the sheet width is narrower, use –, if the sheet width is wider, use +.
e
d
c
40 © 2004 General Binding Corporation