Installing The Processor; Installing The Processor Onto A Base - Kodak X-OMAT M35 Installation Instructions Manual

Installing the Processor onto a Base

The processor weighs 90 kg (200 lb).
Use qualified personnel to install this
processor.
[1] Remove the processor from the SHIPPING
BASE. See the illustration on page 5.
[2] Remove the 4 LEVELING SCREWS from the
processor.
[3] Install the processor on a stable, flat surface
or on a KODAK M35 X-OMAT Mounting
Stand, CAT No. 808 1176.
[4] Install the LEVELING SCREWS through the
MOUNTING STAND or the stable, flat
surface.
12

Installing the Processor

PROCESSOR
MOUNTING
LEVELING
STAND
SCREW
(4)
H112_0148CCA
H112_0148CA
981159