Connecting The Main Power For An M35A Processor, 120 Volts Only - Kodak X-OMAT M35 Installation Instructions Manual

Connecting the Main Power for an M35A Processor,
• Dangerous voltage.
• Possible damage from electrostatic
discharge.
[1] Check and use the Local Electrical Codes.
[2] Consult with the customer about installing the
POLARIZED RECEPTACLE.
[3] Turn off the power to the wall outlet where the
POLARIZED RECEPTACLE will be installed.
[4] Install, or have the customer install, the
POLARIZED RECEPTACLE.
The COVER PLATE is not supplied.
[5] Move the MAIN POWER SWITCH on the
processor to the ''OFF'' position.
[6] Plug the POWER CORD into the POLARIZED
RECEPTACLE.
22
120 Volts Only
NOTE
POLARIZED
RECEPTACLE,
M35A Processor
only
Connecting the Main Power to an M35A Processor
TOP COVER
MAIN POWER SWITCH
POWER
CORD
H112_0089ACB
H112_0089AC
H112_0122BCB
H112_0122BA
981159