Unpacking The Processor.6; Removing The Packing Materiai.6 - Kodak X-OMAT M6B Installation Instructions Manual

Unpacking the Processor
If you are unpacking the processor anywhere other than in the finai destination, it is
recommended that you keep the internai packing materiai in piace untii you move the processor to
the actuai instaiiation site. If you do unpack the processor somewhere other than the final
destination, make sure to install any removed parts and pack any loose parts carefully with the
processor for transport.
Make sure that the processor is always upright during transport, storage, and installation.
Removing the Packing Materiai
[1] Cut the METAL BANDS around the outside of the SHIPPING CARTON.
The processor is not attached to the shipping skid. Use care when moving the processor.
[2] Remove the SHIPPING CARTON from the processor.
[3] Remove the CARDBOARD from the top of the processor.
[4] Remove the TOP COVER from the processor.
[5] Remove the CARDBOARD from between the WASH RACK and the WASH TANK.
6
246626