10. Appendix 2 Setting the Tag Data Links Using the Software
10.4. Setting Up the Network Using the
Software
↓
10.4.1. Starting the Network
Configurator and Uploading the
Configuration
↓
10.4.2. Importing Files and
Registering Tags
↓
10.4.3. Setting the Connection
↓
10.4.4. Transferring the Tag Data Link
Parameters
↓
7.6. Checking the EtherNet/IP
Communications
↓
7.6.1. Checking the Connection Status
↓
7.6.2. Checking Data that are Sent
and Received
Set the tag data links for EtherNet/IP using the
software.
Start up the Network Configurator, connect online
with the Controller, and upload the network
configuration.
Import the CSV file that was saved, and register tags
of the originator's send area and receive area.
Associate the tags of target device with the tags of
originator.
Transfer the tag data link settings that were set to
the Controller.
Confirm that the EtherNet/IP communications are
performed normally.
Check the connection status of the EtherNet/IP
network.
Confirm that the correct data are sent and received.
55