Omron NJ Series Network Connection Manual page 65

10. Appendix 2 Setting the Tag Data Links Using the Software
12
Double-click Global variables
under Programming - Data in
the Multiview Explorer.
13
The Global Variables Tab is
displayed in the Multiview
Explorer.
Click a column under the Name
Column to enter a new variable.
Enter EIPOutput in the Name
Column.
Enter S_EIPOutput in the Data
Type Column.
Select Output for the Network
Publish attribute from the list.
14
After entering, right-click and
select Create New from the
menu.
15
In the same way as step 13,
enter the following data in the
new columns.
•Name: EIPInput
Data type: S_EIPInput
Network Publish: Input
16
Double-click Task Settings
under Configurations and Setup
in the Multiview Explorer.
The Task Settings Tab Page is
displayed in the Edit Pane. Click
the Settings for Exclusive
Control Variables in Tasks
Button.
Click the + Button.
62