10. Appendix 2 Setting the Tag Data Links Using the Software
3
The Project Properties Dialog
Box is displayed.
*In this document, New Project
is set as the project name.
Confirm that Category and
Device to use are set in the
Select Device Field.
Select version 1.03 from the
pull-down list of Version.
*Although 1.03 is selected in this
document, select a version you
actually use.
4
Click the Create Button.
5
The New Project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
6
Double-click Built-in
EtherNet/IP Port Settings
under Configurations and
Setup - Controller Setup in the
Multiview Explorer.
Multiview
Edit Pane
Explorer
Toolbox
57