Storage; Maintenance - Stamina Muuv Bike Owner's Manual

STORAGE

1. To store the müüv bike, simply keep it in a clean dry place.
2. Adjust the HANDLEBAR POST(13) and the SEAT POST(6) to the lowest position. Adjust the SEAT
SLIDER(8) to the most forward position. The müüv bike is approximately 56 inches long (min.) x 21.9
inches wide x 49.4 inches tall (min.). These dimensions will vary. Please measure your müüv bike if
exact dimensions are needed.
3. To move the müüv bike, lift from the handle on the REAR STABILIZER(3) and use the MOVING
WHEELS(60) on the FRONT STABILIZER(2).

MAINTENANCE

The safety and integrity designed into the müüv bike can only be maintained when the müüv bike is
regularly examined for damage and wear. Special attention should be given to the following:
1. Power on the SMART MOUNT(45). Adjust the TENSION KNOB(44) and verify that it functions
properly and the resistance changes.
2. Use a wrench to verify that the PEDALS(17, 23) are tightened securely. If tightening is required,
remember that the left pedal has left hand threads and is tightened by turning counterclockwise.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the CAUTION LABEL(54) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(54) if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components must be replaced immediately or the müüv bike removed from service
until repair is made.
7. Only Stamina Products supplied components should be used to maintain/repair the müüv bike.
8. Keep your müüv bike clean by wiping it off with an absorbent cloth after use.
25