Storage; Maintenance - Stamina Airgometer 1100 Owner's Manual

STORAGE

1. To store the Airgometer 1100, simply keep it in a clean dry place.
2. The Airgometer 1100 is approximately 48 inches long x 24.6 inches wide x 52 inches tall. These
dimensions may vary. Please measure your Airgometer 1100 if exact dimensions are needed.
3. To move the Airgometer 1100, lift the REAR STABILIZER(2) and use the WHEELS(76) on the FRONT
STABILIZER(3).
4. To avoid damage to the electronics, remove the batteries before storing the Airgometer 1100 for one
year or more.

MAINTENANCE

The safety and integrity designed into the Airgometer 1100 can only be maintained when the
Airgometer 1100 is regularly examined for damage and wear. Special attention should be given to the
following:
1. Pedal slowly and verify that the Air Resistance System provides resistance. The Air Resistance
System should provide many years of use.
2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that
the left pedal has left hand threads and is tightened by turning counterclockwise.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the WARNING LABEL(99) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(99) if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components must be replaced immediately or the Airgometer 1100 removed from
service until repair is made.
7. Only Stamina Products supplied components should be used to maintain/repair the Airgometer 1100.
8. Keep your Airgometer 1100 clean by wiping it off with an absorbent cloth after use.
16