Stamina Muuv Bike Owner's Manual page 24

OPERATIONAL INSTRUCTIONS
PEDAL STRAP ADJUSTMENT
Use the following procedure to adjust the PEDAL STRAP:
1. Place the ball of each foot on the pedal and in the Toe Cage such that the ball of the foot is centered
over the pedal spindle and under the Pedal Strap.
2. Rotate the cranks until one foot is in a position closest to you.
3. To tighten the Pedal Strap, pull up on the end of the strap until it fits snugly over your shoe. Make sure
that the strap is secure, but not overly tight or pressing uncomfortably on your foot.
4. Repeat for the other foot.
5. To loosen the Pedal Strap, press down on the Clip that holds the strap secure, and pull slightly outward.
Release the Clip to lock the strap into place.
If the Pedal Strap break away from the Clip, follow the process below to thread it back to the Clip:
1. Refer to view 1. Run the Pedal Strap through the slot holes in the Clip Inner Piece and Clip Outer
Piece.
2. Refer to view 2. Press the Clip down and run the Pedal Strap through the slot hole in the Clip Outer
Piece on the top.
Right Pedal(23)
Right Pedal(23)
Toe Cage
Pedal
Strap
Clip
Toe Cage
Pull the Pedal Strap to tighten.
Press the Clip down and pull slightly
outward to loosen the Pedal Strap.
Clip Inner
Piece
Clip Outer
Piece
24
1.
Pedal
Strap
2.
Clip Outer
Piece
Clip
Pedal Strap