Stamina Muuv Bike Owner's Manual page 16

ASSEMBLY INSTRUCTIONS
STEP 7
Attach the WATER BOTTLE HOLDER(24) to the MAIN FRAME(1) with LARGE ROUND HEAD SCREWS
(M5x0.8x8mm)(71).
STEP 8
Plug the EXTENSION CONTROL CABLE(102) into the CONTROL CABLE(103). Plug the EXTENSION
WIRE(101) into the CONNECTING WIRE(104). Push the excess wires back into the HANDLEBAR
POST(13), then attach the MOUNTING POST(12) to the HANDLEBAR POST(13) with BUTTON HEAD
BOLTS(M8x1.25x15mm)(72) and BUTTON HEAD BOLT(M6x1x12mm)(70). Attach the LEFT and RIGHT
MOUNTING COVERS(39, 40) to the MOUNTING POST(12) to cover the bracket with ROUND HEAD
SCREWS(ST4.2x16mm)(16).
NOTE: Be careful not to damage the wires when attaching the MOUNTING POST(12).
STEP 9
Attach the HANDLEBAR(10) to the HANDLEBAR POST(13) and secure with the HANDLEBAR LOCKING
LEVER(46) and WASHER(M10xø25x2mm thick)(87).
16