Stamina Muuv Bike Owner's Manual page 23

OPERATIONAL INSTRUCTIONS
HANDLEBAR HEIGHT ADJUSTMENT
HANDLEBAR(10) height is a matter of preference. Start with the HANDLEBAR(10) at the same height
as the seat. Adjusting the HANDLEBAR(10) higher will give the rider a more upright position; lowering the
HANDLEBAR(10) will result in a more prone position.
To adjust, loosen and pull the UPRIGHT LOCKING LEVER
(49), then lower or raise the HANDLEBAR(10) to the desired
height, and secure with the UPRIGHT LOCKING LEVER(49).
NOTE: The pin of the UPRIGHT LOCKING LEVER(49)
must be inserted into one of the adjustment holes
in the HANDLEBAR POST(13) and the UPRIGHT
LOCKING LEVER(49) must be screwed in tight to
ensure that the HANDLEBAR(10) will fit securely in
the MAIN FRAME(1).
FORWARD/AFT POSITION OF HANDLEBAR
Adjusting the HANDLEBAR(10) forward or backward helps
you find a comfortable position for your workout.
Loosen the HANDLEBAR LOCKING LEVER(46), slide the
HANDLEBAR(10) to the desired position, and secure with
the HANDLEBAR LOCKING LEVER(46).
NOTE: The HANDLEBAR LOCKING LEVER(46) should
be screwed in tight to make the HANDLEBAR(10)
fit securely in the HANDLEBAR POST(13).
SMART MOUNT ANGLE ADJUSTMENT
Adjusting the angle of the SMART MOUNT(45) helps you view the screen on your device properly. Refer to
the detail view below. To adjust, loosen the LOCKING KNOB(95) at the back of the SMART MOUNT(45).
Adjust the SMART MOUNT(45) to the desired angle and secure with the LOCKING KNOB(95).
23