Assembly Instructions - Stamina Muuv Bike Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
NOTE: There are some packing parts attached on the müüv bike. Please follow the steps below to
remove them before any assembly. These parts are only for packing, do not dispose of the
packing materials until assembly is completed.
STEP 1
Remove the BOLTS and NUTS from A and B two positions. Remove the PACKING SUPPORT.
Install the müüv app
for a step-by-step
assembly video.
Packing
Support
13