Assembly Instructions - Stamina 15-0340A Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
STEP 1
Refer to illustration below. Unfold the REAR FRAME(2) away from the MAIN FRAME(1). Lock the frame
assembly in unfolded position by inserting the BALL PIN(73) into the upper hole in the REAR FRAME(2).
STEP 2
Attach the REAR STABILIZER(8), the one with WHEELS(23), to the REAR FRAME(2) with the wheels
facing backward. Secure with CARRIAGE BOLTS(M8x1.25x65mm)(63), ACORN NUTS(M8x1.25)(77),
and ARC WASHERS(M8)(78).
STEP 3
Attach the FRONT STABILIZER(4) to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)
(63), ACORN NUTS(M8x1.25)(77), and ARC WASHERS(M8)(78).
Insert the pin into the upper
hole to lock the frames in
unfolded position.
8