Assembly Instructions - Stamina 15-1350C Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
STEP 1
Attach the FRONT STABILIZER(2), the short one with the ENDCAPS(36), to the front of the FRONT
FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(47), ARC WASHERS(M8)(65), LOCK WASHERS(M8)
(67), and ACORN NUTS(M8x1.25)(61).
STEP 2
Unscrew to remove the ADJUSTMENT KNOB(37) from the FRONT FRAME(1). Slide the REAR FRAME(3)
backward and secure with the ADJUSTMENT KNOB(37). Attach the REAR STABILIZER(4), the one with
the LEVELING CAPS(40), to the REAR FRAME(3) with CARRIAGE BOLTS(M8x1.25x65mm)(47), ARC
WASHERS(M8)(65), LOCK WASHERS(M8)(67), and ACORN NUTS(M8)(61).
NOTE: You can adjust the LEVELING CAPS(40) on the REAR STABILIZER(4) to keep the Recumbent
Bike stable.
STEP 3
Attach the LEFT and RIGHT SEAT FRAMES(5, 6) to both sides of the REAR FRAME(3) with BUTTON
HEAD BOLTS(M10x1.5x122mm)(49), WASHERS(M10)(69), and NYLOCK NUTS(M10x1.5)(59).
8