1. Remove the spark arrestor nut
2. Remove the spark arrestor
3. Place the transmission in park, and start the engine.
4. Purge carbon by momentarily revving the engine
several times.
5. Cover the exhaust outlet and lightly tap the silencer
with a rubber mallet, and then rev the engine
momentarily a few more times.
6. Stop the engine and allow the silencer to cool.
7. Use compressed air and a non-synthetic brush to
clean the arrestor screen.
8. Reinstall the arrestor and fastener, and torque the
retaining screw to specification.
TORQUE
Spark Arrestor Fastener
8 ft/lbs (11 Nm)
q
w
and bolt
.
e
.
ENGINE MOUNT FASTENER TORQUE
Check engine mount fasteners
tight. Also inspect the condition of the rubber mounts. If
mounts are cracked or show signs of fatigue, replace
them.
MAINTENANCE
q
and ensure they are
2
2.21