Polaris Sportsman 850 Service Manual page 367

4. Refer to the assembly instructions for component
installation onto the shock asm.
Body/Bearing Cap
5. Use a small pick to remove seal from the body/
bearing cap.
6. Lubricate a new seal and fully install into body/
bearing cap.
7. Install the Shock Seal Protector Sleeve (2201639)
through the bearing cap seal to insure proper
installation.
STEERING / SUSPENSION
8. Refer to the assembly instructions for component
installation onto the shock asm.
Bearing Assembly
9. Use a small pick to remove the U-cup seal (C),
internal (D) and external (E) O-rings from the bearing
assembly.
NOTE
If the bearing bushing requires replacement, replace
the bearing assembly.
10. Lubricate and install the O-rings and U-cup seal.
11. Push the Shock Seal Protector Sleeve (2201639)
through the bearing assembly O-ring and U-cup seal
to insure proper installation.
8
8.37