14. Remove the (4) through-bolts retaining the rear
gearcase to the frame.
15. Lift up on the gearcase and move it forward in the
frame.
16. Begin to rotate the gearcase down and remove the
vent line.
17. Using your hand, press down on the inner PVT cover
and continue to rotate the gearcase down and
forward until it is removed from the frame.
NOTE
Do not use a pry bar to flex the inner PVT cover as
damage to the cover will occur.
18. Rotate the gearcase so the input shaft is facing down
and remove the rear gearcase from the vehicle.
FINAL DRIVE
7
7.63