Polaris Sportsman 850 Service Manual page 300

FINAL DRIVE
7. Install the torsion spring by wrapping each leg of the
spring around the dowel pin on the ring gear.
8. Install the rollers and roll cage into the ring gear.
Insert the rollers as the roll cage is installed.
a
9. Install the pins , roll cage
i
assembly into the gearcase housing.
10. Align the spring retainer dowel pin with the ring gear
dowel pin and install the retainer
torsion spring.
7.44
11. Check the action of the torsion spring by rotating in
12. Install the armature plates
o
, and ring gear
13. Install the RH output hub
y
on top of the
both directions to ensure the spring and retainer are
installed properly.
plate tabs are fully engaged into the roll cage
assembly.
NOTE
Verify armature plate tabs are in the slots on the roll
cage and are resting in the ring gear grooves.
housing. The output hub should spin freely.
t
. Be sure the armature
e
into the gearcase