Polaris Sportsman 850 Service Manual page 321

Hide thumbs Also See for Sportsman 850:

Table of Contents

12. Remove the through-bolt fastener retaining the right

rear upper A-arm to the bearing carrier. Pivot the

wheel hub and bearing carrier down to remove the

drive shaft from the gearcase.

Take care not to stretch the brake line while removing

the drive shaft.

13. Remove the drive shaft from the rear gearcase by

pulling sharply.

14. Remove the (4) through-bolts retaining the rear

gearcase to the frame.

15. Move the gearcase forward in the frame and remove

the vent line from the gearcase.

16. Using care, remove the rear gearcase through the

bottom of the frame.

Be sure to move the rear brake line out of the way upon

removal to prevent from damaging it.

Chapters

Table of Contents

Sportsman 1000