Polaris Sportsman 850 Service Manual page 211

15. With the belt removed, completely remove the
retaining bolt and driven clutch
16. Install the Drive Clutch Holder (PN 9314177-A) onto
the drive clutch.
Drive Clutch Holder:
9314177-A
17. Remove the drive clutch retaining bolt
the bolt in a clockwise direction.
NOTE
The drive clutch retaining bolt has left-hand threads.
Turn the bolt clockwise to remove it.
18. Insert the Drive Clutch Puller (PA-48595) into the
r
.
19. If removing the inner PVT cover, continue with this
t
by turning
drive clutch and use it to remove the clutch from the
shaft.
Drive Clutch Puller:
PA-48595
procedure.
a. Remove the (10) screws that retain the inner PVT
cover to the transmission case and remove the
cover.
b. Remove the old silicone material from the inner
PVT cover and transmission case using a wire
brush. Clean both surfaces
preparation for assembly.
PVT SYSTEM
5
thoroughly in
5.7