Advertisement
Important Safety Information
Important Safety Information
Safety Labels
Your OFM26 Series Offset Flail Mower comes equipped with
all safety labels in place. They were designed to help you safely
operate your equipment. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
76034
76034
6
OFM2660, OFM2672 & OFM2678 Offset Flail Mowers 333-142M
Table of Contents
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement. To install
new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
818-130C
Warning: PTO Speed Hazard
Place: Right, front side of 3-point hitch frame
818-714C
Danger: Crushing Hazard
1 Place: Left, top side of 3-point hitch frame
3/1/21
Advertisement
