Advertisement
Section 4: Maintenance & Lubrication
76079
76081
76083
76084
54
OFM2660, OFM2672 & OFM2678 Offset Flail Mowers 333-142M
Table of Contents
If Grease Zerk is provided,
lubricate profiles here.
Roller Right Side Bearing
Lubricate bearings every 30 hours and after each heavy
duty usage. Bearings that do not need maintenance work
should not be lubricated.
1 - Zerk
Type of Lubrication: Multi-purpose Grease
Quantity = As required
Roller Left Side Bearing
Lubricate bearings every 30 hours and after each heavy
duty usage. Bearings that do not need maintenance work
should not be lubricated.
2 - Zerks
Type of Lubrication: Multi-purpose Grease
Quantity = As required
Driveline Universal Joints
See the service instructions in the documentation
included with the driveline.
2 - Zerks
Type of Lubrication: Multi-purpose Grease
Quantity = 2-3 pumps
Driveline Profiles
See the service instructions in the documentation
included with the driveline.
If outer profile is provided with a grease zerk, lubricate
profiles using the grease zerk. Otherwise, separate the
two driveline haves and apply grease on the outside of
the inner profile.
1 - Zerk
Type of Lubrication: Multi-purpose Grease
Quantity = Coat generously
30
Hours
30
Hours
8
Hours
30
Hours
3/1/21
Advertisement
