Download
Share
Print this page
Land Pride RCR1860 Operator's Manual
  1. Manuals
  2. Brands
  3. Land Pride Manuals
  4. Lawn Mower
  5. RCR1860 Series
  6. Operator's manual

Land Pride RCR1860 Operator's Manual

Rotary cutters
Hide thumbs Also See for RCR1860:

Advertisement

Quick Links

Download this manual
Rotary Cutters
RCR1860 & RCR1872
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
312-849M
Operator's Manual
Printed 10/22/20
21416

Advertisement

loading

Related Manuals for Land Pride RCR1860

Summary of Contents for Land Pride RCR1860

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 10/22/20...
  • Page 2 Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 5  Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
  • Page 6  Replace parts on this implement correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only.  Always properly match the wheel before leaving the operator’s seat to Do not alter this implement in a way size to the properly sized tire.
  • Page 7 Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  Slow moving tractors, and  Never carry riders on the tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
  • Page 8 Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica  Be aware of and follow OSHA  If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
  • Page 9 Important Safety Information This page left blank intentionally. 10/23/20...
  • Page 10 Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 11 Table of Contents Important Safety Information 21428 818-130C Warning: 540 rpm 21428 818-543C Danger: Guard Missing 21418 818-142C Danger: Rotating Driveline 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 12 Table of Contents Important Safety Information 21428 818-556C Danger: Thrown Object 35894 35894 818-555C Danger: Rotating Blades RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 13 Table of Contents Important Safety Information 35894 858-095C 2" x 4 1/2" Red Reflector (2 places) 24597 818-552C Danger: Rotating Driveline 24597 818-540C Danger: Guard Missing 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 14 Table of Contents Important Safety Information 21428 858-148C Warning: Pinch Point Hazard 2 Places RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 15 1-1/ 2" to 13" and the RCR1872 has a cutting height range of 1-1/2" to 11-1/2". Cutting blade tip speed for the RCR1860 is 16,363 FPM and for the RCR1872 is 14,955 FPM. These units come with 10 ga.
  • Page 16 Refer to Figure 1-2 on page 13: top of gearbox and replace with vented dipstick. See your nearest Land Pride dealer if dipstick is missing. Tailwheel A-frame (#1) is shipped with the short cross brace attached to adjusting bracket (#2).
  • Page 17 (#4) align with hole in floating top hitch (#20). 11. Insert 3/4"-10 x 4" GR5 bolt (#9) into the left rear brace (#4), floating top hitch (#20), and right rear brace (#4). 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 18 Consult your tractor Operator’s Manual to determine proper weight requirements and maximum weight limitations. 21408 Driveline Installation NOTE: Land Pride’s Quick Hitch can be attached to Figure 1-3 the tractor to provide quick and easy 3-point hook- up and detachment. See your nearest Land Pride Driveline Installation dealer to purchase a Quick-Hitch.
  • Page 19 Please consult your tractor’s manual. IMPORTANT: An additional driveline may be 9. Continue with “Check Driveline Interference” on required if implement is attached to more than one page 17. tractor or if a Quick Hitch is used. 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 20 6. Hold inner and outer drivelines parallel to each other. If dimension “A” is greater than or equal to 1", then skip to “Check Driveline Maximum Length” on page 17. Otherwise continue with step 7. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 21 Start tractor, raise implement slightly, and drive forward enough to clear the support blocks. 8. Lower implement to ground and shut tractor down using “Tractor Shutdown Procedure”. 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 22 3/8" flange nuts (#4). 21403 3. Tighten all 3/8" flanged nuts (#4) to 31 ft-lbs. as indicated in the “Torque Values Chart for Common Rear Rubber Guard Figure 2-3 Bolt Sizes” on page 36. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 23 (#4), and 3/8" flange nuts (#2). 3. Tighten all 3/8" flange nuts (#2) to 31 ft-lbs. as indicated in the “Torque Values Chart for Common Bolt Sizes” on page 36. 21402 Front Rubber Guard Figure 2-5 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 24 Set tractor’s 3-point hydraulic control stop at this height. Blade Tip At This End Should Be Cutting Height Slightly Higher Than Cutting Height Blade Tip Blade Tip 21424 Cutting Height Figure 3-2 RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 25 3. Lock tractor center link in this position once correct length is achieved. Adjustment on center 3-point link can be made depending on customer’s preference. 21421 Tailwheel Height Adjustment Figure 3-4 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 26 Body extremities will be cut Do not use implement as a man lift or work platform. It is off instantly. not properly designed or guarded for this use. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 27 10. Verify cutter height is set correctly. See “Deck 5. Shift tractor to a lower gear when traveling over rough Leveling & Height Adjustments” on page 20. or hilly terrain. 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 28 Tighten all loose bolts and nuts as indicated in the towards cutter gearbox. “Torque Values Chart” on page 36. 9. Rotate driveline storage hook down and place 8. For additional information, see “General Operating driveline in storage hook. Instructions” on page 25. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 29 With a little practice you will be more raise the cutter to cutting height to check for pleased with what you and your Land Pride Rotary Cutter driveline bind or chatter. Lower the cutter to the ground, can do.
  • Page 30 Reusing a used locknut can result in can result in an out-of-balance condition that will a thrown blade. Always use a new locknut when contribute to premature bearing wear/breakage and/ installing blades. or structural cracks in gearbox and/or deck. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 31 2 820-198C .RCR1860 STANDARD BLADE 25"LG. CCW is set-up with. 2 820-566C RCR1872 STANDARD BLADE 29"LG. CCW 2 820-212C . . RCR1860 LOW LIFT BLADE 25"LG. CCW Shearbolt Protected Drivelines 2 820-213C RCR1872 LOW LIFT BLADE 31"LG. CCW 3 312-815H RCR1860 15" DISHPAN WELDMENT WARNING 3 312-841H RCR1872 15"...
  • Page 32 Refer to “Clutch Run-In” on Refer to Figure 5-4: this page. See Parts Manual for a detailed parts Progressively tighten each spring retainer bolt until breakdown. correct spring height “A” is reached. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 33 4. Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. Paint is also available in touch-up bottles with brush, quarts, and gallon sizes by adding...
  • Page 34 IMPORTANT: Use a suction or siphon pump to drain Quantity = Fill until oil reaches top mark on dipstick or gearbox of oil when there is not an oil drain plug. begins to flow out side plug hole in gearbox. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 35 Driveline Shield Bearings Type of Lubrication: Grease Quantity = 6 pumps 13755 Hours Driveline Profiles Quantity = Clean & coat inner tube of driveline with a light film of grease and then reassemble. 14618 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 36 4" x 8" x 15" Laminated tire with cast iron hub or 4" x 16" molded rubber tire Front Guard Optional: Rubber Belting Accessory: Chain Guard Rear Guard Standard: Metal Band Optional: Rubber Belting Accessory: Chain Guard RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 37 Table of Contents Section 6: Specifications & Capacities 16" (40.6 cm) RCR 1860 = 99-3/8" (2.52 m) RCR 1872 = 110" (2.79 m) 26814 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 38 Section 7: Features & Benefits RCR1860 & RCR1872 Models Features Benefits Surpassed rugged All Land Pride cutters have been designed and tested and meet rigorous voluntary industry standards testing procedures specified by ANSI. 5 Year gearbox warranty Shows our confidence in the gearbox integrity.
  • Page 39 Driveline bent Replace driveline Blades loose Tighten blade bolts Blade carrier bent Replace blade carrier Blade broken Replace blade Blade will not swing Remove and inspect blade Blades have unequal weight Replace both blades 10/23/20 RCR1860 & RCR1872 Rotary Cutters 312-849M...
  • Page 40 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. Additional Torque Values Blade Carrier Hub Nut 450 ft-lbs. Minimum Blade Bolt Locknut 450 ft-lbs. RCR1860 & RCR1872 Rotary Cutters 312-849M 10/23/20...
  • Page 41 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 42 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

This manual is also suitable for:

Rcr1872