Advertisement
Section 6: Features & Benefits
Section 6: Features & Benefits
Features
Multiple cutting widths
60", 72", & 78" (155, 185, & 213 cm)
Wide range of tractor horsepower
45 hp to 100 hp (34 kW to 75 kW)
Spring-loaded, belt-tensioning
system
High blade cutting capacity
Reverse rotor rotation
High blade tip speed
Five drive belts
Offset right
Flail head can be rotated from
o
horizontal to 65
up or down
Counter-blade (accessory)
Replaceable skid shoes
Adjustable roller
3/1/21
Table of Contents
Features & Benefits
OFM26 Series Offset Flail Mower
Wide selection of cutting widths to meet specific applications.
Fits a large array of tractors to meet the needs of consumers, municipalities, and
landscapers.
Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes
maintaining proper belt tension easy, and increases belt life.
Hammer blade can cut up to 2" (5 cm) brush and small saplings.
Brings the cut material up and over the rotor which allows it to be dispersed more evenly.
Allows material to be shredded completely.
Creates a vacuum effect, provides a clean cut, and slices through saplings with great
force.
Five drive belts distributes the load evenly, which prevents the belts from jumping off the
drive when a shock load occurs.
The lateral arm allows the mower to be offset to the right 22 1/2" (57 cm) for a closer cut
alongside buildings, fences, and roadsides. It also allows the mower to be cutting in a
ditch with the tractor traveling along side the ditch.
Allows mowing along banks and in ditches without putting the tractor on steep inclining
or declining surfaces.
Assist shredding material into fine particles.
Prevents wear on end panels from ground contact.
Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm).
OFM2660, OFM2672 & OFM2678 Offset Flail Mowers 333-142M
Benefits
59
Advertisement
