Advertisement
Section 1: Assembly & Set-up
Handling & Unloading Instructions
!
CAUTION
To prevent serious injury:
Perform the handling and loading operations in accordance
with the information supplied by the manufacturer, which can
be found on the machine and in the user instructions. If
necessary, the individuals authorized to perform these
operations must prepare a "safety plan" in order to protect
those who are directly involved.
Packing & Unpacking
h
IMPORTANT: When unpacking the machine, sort
the packing materials correctly by category.
IMPORTANT: Packaging materials, dust, and
chemical products must be disposed of correctly.
IMPORTANT: Upon receipt, check that the machine
and its components are not damaged. In the case of
damage or missing parts, call the manufacturer or
your local dealer to agree upon the procedures to be
adopted.
Depending on the destination, the loading and transport
operations can be carried out using different means.
The packaging and crating solution used depends
entirely on the shipping method chosen and the
dimensions of the components packed.
Wear appropriate personal protective equipment (PPE)
that is kept in good condition to protect the hands, feet,
head etc. when removing the packaging/crate.
3/1/21
Table of Contents
A
B
5
6
Attach Flail head to The Hitch Lateral Arms
Attach Flail head to the Hitch
Refer to Figure 1-4:
1.
Support hitch frame (#1) and lateral arms (#2) with a
hoist while aligning the hitch pin holes in the lateral
arms with the hitch pin holes in the rotor
housing (#3).
2. Attach lateral arms (#2) to flail head (#3) with lateral
arm pins (#4).
3. Make sure the flat surface of arm pin heads (A) are
against key stops (B).
4. Secure arm pins (#4) in place with spacers (#5) and
M27 nuts (#6). Tighten nuts to the correct torque.
5. Adjust park stands (#7) to the correct height to
support the hitch frame (#1) with the lateral arms (#2)
level.
6. Secure park stands (#7) with bent pins (#8) and
hairpin cotter (#9).
7.
Remove hoist from the hitch frame (#1) and lateral
arms (#2).
OFM2660, OFM2672 & OFM2678 Offset Flail Mowers 333-142M
4
3
1
2
8
7
9
Figure 1-4
76066
15
Advertisement
