Riding Mode - BMW S 1000R 2015 Rider's Manual

If the coding plug is not inser-
4
ted, you have the alternative of
switching the ignition off and
54
then on again.
A DTC fault has
occurred if the DTC
warning light shows when
the motorcycle accelerates
to a speed in excess of the
minimum stated below after
the ignition was switched off
and then on again.
z
min 5 km/h

Riding mode

Using the riding modes
BMW Motorrad has developed
4 operational scenarios for your
motorcycle from which you can
select the scenario suitable for
your situation:
Riding on a rain-wet road sur-
face.
Riding on a dry road surface.
with Pro riding modes
Dynamic riding on a dry road
surface.
Sporty riding on a dry road sur-
face.
The interplay of engine torque,
throttle response, ABS control
and ASC or DTC control is op-
timised for each of these 4 scen-
arios. The optimum setting is a
preset with DDC.
Setting riding mode
Switching on ignition (
OE
Press button 1.
NOTICE
See the section entitled "Engin-
eering details" for more inform-
ation on the various ride modes
that can be selected.
40).