Table of Contents
Advertisement
9
144
Insert the wheel-speed sensor
into the bore and secure it with
screw 1.
z
Hold right brake caliper 1 in
position, install screws 2 and
tighten to specified torque.
Radial brake caliper to
axle mount
38 Nm
Remove the adhesive tape
from the wheel rim.
Firmly pull the brake lever until
the pressure point is percept-
ible, and repeat this operation
several times.
Removing rear wheel
Lift the motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Install the rear-wheel stand
(
123).
Slip wooden chocks or similar
under the rear wheel to prevent
it from dropping out after the
quick-release axle has been
removed.
Press brake caliper 1 against
brake disc 2
Brake pistons are pushed back.
Remove axle nut 1 with
washer.
Advertisement
Table of Contents
