Table of Contents
Advertisement
Removing front wheel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1 and remove
the wheel-speed sensor from
its bore.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
ATTENTION
Brake pads pushed together
with brake caliper removed.
It is not possible to slip the brake
caliper over the brake disc.
Do not operate the brake lever
while a brake caliper has been
removed.
Remove screws 1 of the brake
calipers on left and right.
Force the brake pads 1 slightly
apart by rotational movement
of the brake caliper 2 against
brake disc 3.
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Lift the motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Install the rear-wheel stand
(
123).
Lift the front of the motorcycle
until the front wheel is clear of
the ground, preferably using
9
141
z
Advertisement
Table of Contents
