Table of Contents
Advertisement
When rolling the rear wheel
into position, take care not to
damage wheel-speed sensor 1.
Roll the rear wheel further into
the swinging arm, while push-
ing brake-caliper carrier 1 for-
ward at the same time.
Roll the rear wheel as far
forward as possible and loop
chain 1 over the sprocket.
Insert right adjusting plate 1
into the swinging arm with
stop 2 to the front.
Lift the rear wheel and work
quick-release axle 3 through
the adjusting plate and into the
brake-caliper carrier and the
rear wheel.
Make sure that the quick-re-
lease axle is seated against the
stop of the adjusting plate.
9
147
z
Advertisement
Table of Contents
