Table of Contents
Advertisement
Slacken locknuts 2 on left and
right.
Slacken adjusting screws 3 on
left and right.
Remove adjusting plate 4 and
push the axle in as far as it will
go.
Remove quick-release axle 1
and remove adjusting plate 2.
Roll the rear wheel as far
forward as possible and
disengage chain 1 from the
sprocket.
Remove screw 1 and
disengage the brake line from
holder 2.
When rolling the rear wheel
clear of the motorcycle, take
9
145
z
Advertisement
Table of Contents
