Rear-Wheel Stand - BMW S 1000R 2015 Rider's Manual

6 Spare fuses with puller tool
Miniature fuses, 4 A, 7.5 A
and 10 A
Puller tool for removing
fuses
Spare fuses
7 Plastic adapter for socket
wrench
with Dynamic Damping
Control (DDC) OE
Adjusting spring preload
for front wheel (
8 Torx bit, T25
Removing and installing
body panels.
Remove the front seat
( 62).

Rear-wheel stand

Install the rear-wheel
stand
ATTENTION
Vehicle topples to side when
being lifted on to stand.
Risk of damage to parts if vehicle
topples.
Secure the vehicle to prevent it
80).
toppling, preferably with the as-
sistance of a second person.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use basic stand with the
adapters. The basic stand
and its accessory components
are available from your
BMW Motorrad authorised
dealer.
9
123
z