Table of Contents
Advertisement
9
124
Install adapter pins 1 in the rear
wheel swinging arm on left and
right and tighten to the spe-
cified torque.
z
Swinging-arm adapter to
rear wheel swinging arm
20 Nm
Turn brackets 1 long ends out.
Adjust adapters 2 to the width
of the pins inserted in the rear
wheel swinging arm.
Set the height of the rear-
wheel stand to raise the rear
wheel slightly clear of the
ground.
Engage the rear-wheel stand in
the rear wheel swinging arm
and apply even pressure to
push it down to the ground.
Front-wheel stand
Installing the front-wheel
stand
ATTENTION
Vehicle supported only on
a front-wheel stand and its
rear wheel.
Risk of damage to parts if vehicle
topples.
Advertisement
Table of Contents
