Table of Contents
Advertisement
a BMW Motorrad front-wheel
9
stand.
Installing the front-wheel stand
142
(
124).
z
ATTENTION
Incorrectly aligned threaded
bush in front suspension.
Damage to wheel speed sensor.
ABS malfunction.
Left axle clamping screws
locate the threaded bush; do
not loosen or remove these
screws.
Slacken right axle clamping
screws 1.
Remove quick-release axle 2,
while supporting the wheel.
Roll the front wheel forward to
remove.
Installing front wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and ASC/DTC.
See the information on the ef-
fect of wheel size on the ABS
and ASC/DTC systems at the
start of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ATTENTION
Front wheel installed wrong
way round.
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the front forks.
Advertisement
Table of Contents
