Table of Contents
Advertisement
If pressure points are not clearly
9
perceptible:
128
ATTENTION
Work on brake system not
in compliance with correct
procedure.
Risk to operational reliability of
the brake system.
Have all work on the brake sys-
tem undertaken by trained and
qualified specialists.
Have the brakes checked by a
z
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking front brake pad
thickness
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Turn the handlebars to the full-
lock position.
Visually inspect the left and
right brake pads to ascertain
their thickness. Viewing dir-
ection: From the rear toward
brake pads 1.
Brake-pad wear limit,
front
min 0.8 mm (Friction pad only,
without backing plate)
If the brake pads are worn:
WARNING
Brake-pad thickness less
than permissible minimum.
Diminished braking effect. Dam-
age to the brakes.
In order to ensure the depend-
ability of the brake system, do
not permit the brake pads to
Advertisement
Table of Contents
