Table of Contents
Advertisement
care not to damage wheel-
9
speed sensor 1.
146
Roll the rear wheel to the rear
z
and clear of the swinging arm
and at the same time pull
brake-caliper carrier 1 back far
enough to allow the rear wheel
to clear it.
NOTICE
The sprocket and the spacer
sleeves on left and right are
loose fits in the wheel. Take care
when removing to ensure that no
parts are damaged or mislaid.
Installing the rear wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and ASC/DTC.
See the information on the ef-
fect of wheel size on the ABS
and ASC/DTC systems at the
start of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Roll the rear wheel on the sup-
port into the swinging arm as
far as necessary to permit the
brake-caliper carrier to be in-
serted.
Insert brake-caliper carrier 1
into guide 2.
Advertisement
Table of Contents
