Getting Started - Avaya Partner 18 Connection Manual

Using AT&TCall

Getting Started

If you are using AT&TCall for the first time, it is a good idea for you to perform
the tutorial, which provides the basic procedures for using AT&TCall. This
tutorial takes approximately 15 minutes to complete and shows you how to
perform the following tasks:
1. Run AT&TCall.
2. Open an existing AT&TCall file.
3. Modify an existing card.
4.
Create a new card.
5. Enter notes for a card.
6. Make a telephone call from AT&TCall.
7.
Save an existing file.
8. Create a new file.
9.
Customize the labels in a file.
10. Assign a telephone number to a Quick Dial.
11. Save a new file.
12.
Exit AT&TCall.
After completing this tutorial, you will have performed most of the basic
procedures necessary to use AT&TCall.
4-10