Avaya Partner 18 Connection Manual page 34

Installing and Setting Up PassageWay Solution
4. Connect the DB-25 connector on the PassageWay adapter to the serial
(COM) port on your PC. If your PC has a 9-pin serial (COM) port,
connect the 9-pin to 25-pin adapter to the DB-25 connector on the
PassageWay adapter, and then connect the 9-pin to 25-pin adapter to
the 9-pin serial (COM) port.
NOTE:
You can use an RS-232 cable to connect the adapter to the PC if
you do not want to connect the adapter directly to the PC.
5. Connect one end of the 7-foot, 2-pair, modular phone cord (D4BU) to
the jack labeled "Phone" on the PassageWay adapter.
2-9