Avaya Partner 18 Connection Manual page 42

Installing and Setting Up PassageWay Solution
If you have a PARTNER II Release 3.0 or later system, the
AT&TConnect Setup - Caller ID Inspect Feature dialog box appears
when AT&TConnect finishes reading your telephone. If you do not have
a Caller ID Inspect button already programmed on your telephone, the
AT&TConnect Setup - Caller ID Inspect Feature dialog box prompts you
to enter one (Figure 2-12). If you do have a Caller ID Inspect button
already programmed, the AT&TConnect Setup - Caller ID Inspect
Feature dialog box shows where the Caller ID inspect button is
programmed (Figure 2-1 3).
AT&TBuzz requires a Caller ID Inspect button on your phone in order to
provide you with the ability to view Caller ID information for an incoming
call if you are already active on another call.
2-17