Avaya Partner 18 Connection Manual page 58

Installing and Setting Up PassageWav Solution
To use this option, you must meet the following requirements:
The application that receives the Caller ID must support paste link DDE.
You must have a user-customized interface in the application that
receives the Caller ID. Examples are provided in the Readme file for
AT&TBuzz.
Your PARTNER system must support Caller ID.
For more information on Export via Paste Link DDE mode, refer to
Appendix C.
NOTE:
When you configure AT&TBuzz to run in Export via Paste Link
DDE mode, the contents of the Windows clipboard are
overwritten. Therefore, if you have information in the clipboard
that you want to save, go to another application and paste this
information into a file before initializing AT&TBuzz to run in Export
via Paste Link DDE mode. However, this only occurs when you
first configure AT&TBuzz to run in Export via Paste Link DDE
mode or select the Initialize Paste Link DDE option from the File
menu. The contents of the clipboard are not affected during
operation.
To configure AT&TBuzz to run in Export via Paste Link DDE mode, perform
the following steps:
1.
Select the Export via Paste Link DDE option in the Run Mode dialog
box and select the Continue button.
AT&TBuzz displays a dialog box indicating that the initialization process
is complete.
2 . Select the OK button.
The following dialog box appears.
2-33