Figure 27. Installing Processor - Open The Socket Lever; Figure 28. Installing Processor - Open The Load Plate; Figure 29. Installing Processor - Install The Processor - Intel Server System R1000GZ Service Manual

1. Open the Socket Lever. Push down the lever handle on the OPEN 1st side and away from the
socket to release it. (see letter "A"). Repeat the steps to release the lever on the other side (see
letter "B").
2. Open the Load Plate. Press the locking lever slightly to raise the load plate (see letter "A").
Open the load plate all the way (see letter "B").
3. Install the Processor. Take the processor out of the box and remove the protective shipping
cover (see letter "A"). Orient the processor with the socket so that the processor cutouts match
the four orientation posts on the socket (see letter "B"). Note location of gold key at corner of
processor (see letter "C").
Note: The underside of the processor has components that may damage the socket pins if installed
improperly. Processor must align correctly with the socket opening before installation. DO NOT
DROP processor into socket!
4. Remove the Cover. Press the cover to remove it. Save the protective cover.
®®
Intel Server System R1000GZ/GL Service Guide
Figure 27. Installing Processor – Open the Socket Lever
Figure 28. Installing Processor – Open the Load Plate
Figure 29. Installing Processor – Install the Processor
Hardware Installations and Upgrades
21